User Forum A 24/7 resource for Campbell Scientific users

kern balance output from rs232 port  is weight , interval 1 sec, and i want to log with cr1000 logger..

where can i get sample programm or something like that or what sensor i must use in shortcut?

i got it almost to work ,

i think my problem is formating input string ..

lets say input string is 4 digit number (like 2345)  then  cr1000 saves it also 4 digit number (2345) when interval is 1 sec.

but if i change scan interval 1 min. then cr 1000 saves it as 3 digit number (345) 3 last digits from the input string

balance output format is in page 27 http://www.kern-sohn.com/manuals/files/English/CB-BA-e-0640.pdf

BBBBBBBBB0,0BgBBCRLF

B-blank

and i want to save only number before comma

'Declare Variables and Units
Public SerialInput As String *16
Public SerialFields(1) As Float
Public weight As Float

Units weight=g

'Define Data Tables
	DataTable(Table1,True,-1)

	Sample(1,weight,Float)

EndTable

'Main Program
BeginProg
	' Initialize Serial Port
	SerialOpen(Com4,9600,0,0,100)
	'Main Scan
	Scan(1,Sec,1,0)
		 SerialIn(SerialInput,Com4,6,&h0D,16)

If InStr(2,SerialInput,"",0) Then 
			'Separate input into fields
			SplitStr(SerialFields(),SerialInput," ",1,0)
	
			weight=SerialFields(1)
			'Store weight as floating point number
			EndIf
	
		'Call Data Tables and Store Data
		CallTable Table1
		'send data to serial out
   SerialOpen(Com2,9600,16,0,10000)
         SerialFlush(com2)
      SerialOut(Com2,weight,1,0,100)
   
	NextScan
EndProg