This product is not available for new orders.
| Services Available | |
|---|---|
| Repair | No |
| Free Support | No |
Overview
The 14310 is a 0 dBd gain 1/4 wave antenna with RPSMA connector designed for use with radios operating at 865 to 965 MHz. It is typically used with one of our 900 MHz radio products with an RPSMA antenna jack, such as the RF401A and RF411A. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link.
Note: The yellow stripes on the antenna indicate that this antenna operates with a center frequency of 916 MHz.
Read MoreImages
Detailed Description
The 14310 is a 0 dBd gain 1/4 wave antenna with an RPSMA male plug connector. It has an omnidirectional radiation pattern and a center frequency of 916 MHz. It is fully weatherized and is therefore suitable for indoor and outdoor use.
Note: The yellow stripes on the antenna indicate that this antenna operates with a center frequency of 916 MHz.
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| CR205 (retired) | ||
| CR206 (retired) | ||
| CR206X (retired) | ||
| CR210 (retired) | ||
| CR211 (retired) | ||
| CR211X (retired) | ||
| CR300 (retired) | Compatible with the -RF407 and -RF412 options. | |
| CR310 | Compatible with the -RF407 and -RF412 options. | |
| CR6 | Compatible with the -RF451, -RF407, and -RF412 options. |
Measurement and Control
| Product | Compatible | Note |
|---|---|---|
| 20749 | ||
| AVW211 (retired) | ||
| CWB100 (retired) | ||
| CWB100A (retired) |
Communication Devices
| Product | Compatible | Note |
|---|---|---|
| RF400 (retired) | ||
| RF401 (retired) | ||
| RF410 (retired) | ||
| RF411 (retired) | ||
| RF430 (retired) | ||
| RF431 (retired) |
Additional Compatibility Information
The 14310 covers the frequency bands used by our spread-spectrum radios operating in the 900 MHz range. However, because it has an RPSMA plug connector, the 14310 can only be directly connected to a radio product with an RPSMA jack. This includes, but is not exclusive to, the RF401A, RF411A, CR206X, CR211X, AVW206, and AVW211. Adapters such as pn 28477 and pn 18686 can be used to adapt this antenna to an RF connection other than an RPSMA.
Specifications
| -NOTE- | Electrical specifications measured with 10.16 cm x 10.16 cm (4 in. x 4 in.) reference ground plane. |
| Connector | RPSMA (Reverse Polarity SMA) |
| Center Frequency | 916 MHz |
| Frequency Range | 865 to 965 MHz |
| Gain | 0 dBd |
| Wavelength | 1/4 wave |
| VSWR | < 1.9 typical at center |
| Impedance | 50 ohm |
| Operating Temperature Range | -40° to +90°C |
| Maximum Diameter | 14.5 mm (0.57 in.) |
| Maximum Length | 80.0 mm (3.15 in.) |
| Weight | 453.6 g (1.0 lb) |