FAQs Frequently Asked Questions About our Products and Solutions

All FAQs (386 total: showing 101-120)

Why is NIST traceability beneficial for surface temperature sensors, such as the CS240, the 110PV, and the CS240DM?
How does the CH201 compare with the 18529 Morningstar SunSaver-10 Regulator?
Can the CH201 be connected to two 12 A sources, or does the total from the two sources have to be equivalent to 12 A?
If a CH201 is connected to both a solar panel and an AC/DC power convert, which power supply does the device use?
How quickly can measurements be attained using the ClimaVue™50?
Are the traditional methods of using RTD to measure the back-of-module temperature not used with the CS240 and CS240DM because these methods may cause hot spots?
Can multiple instances of Campbell Scientific SURVEYOR be run on a PC at the same time?
How tight do the wing-nuts on the CM226 integrated mounting stand need to be tightened to secure the solar sensor?
Can the SG000 determine the exact distance to a lightning strike?
When selecting a calibration service for a pyranometer, how do the services differ and what is the importance of ISO 9060?
What are some distinguishing features of the MetSens compact weather sensors?
Can the CSAT3BH heaters be controlled manually?
What happens to the data when the CSAT3BH heaters are on?
How often does the LevelVue™B10 need to be serviced?
For the LevelVue™B10, can I use the temperature value as ambient air temperature?
To get accurate readings with the LevelVue™B10, is it necessary to know the temperature of the water?
Is it necessary to use a stilling well with the LevelVue™B10?
Can the LevelVue™B10 be used in groundwater applications?
Does the LevelVue™B10 log its own data, or does it require a separate data logger?
Does the LevelVue™B10 work with PLCs and other controllers that do not support SDI-12?

Previous Next