FAQs Frequently Asked Questions About our Products and Solutions

All FAQs (444 total: showing 201-220)

If an RF401 is used with a CR10X datalogger to communicate with the RF401 on the computer side, can four different data loggers with RF401 be used on the computer side, thus taking data from four different data loggers and plotting at the same time?
What is the typical range for the RF411?
Is there a shelf-life for the CS511-L Dissolved Oxygen Probe?
Can the CS511-L be used to measure dissolved oxygen in a soil medium?
Is a reference table sent with each CS511-L?
What is the difference between "voltage output", and "oxygen concentration"?
Can the CS511-L be completely immersed?
Is there a connection where the cable can come out of the CS511-L?
Using the BMP5 Direct SDK, how can data be queried from a data logger starting at time1 and continuing to time2?
What might cause a CR23X to lock up and display an "E08 Watchdog Reset" error?
Is it possible to use the BMP5 Direct SDK to connect to a data logger via a modem?
How can a data table on the data logger be deleted using the simplepb.dll library?
Can BMP5 Direct SDK software be used to interface/interact with a CR206X/CR211X datalogger via an RF416/RF411 connected to a PC serial port?
Which dataloggers are compatible with your PC9000 software?
If a facility has ordered the RTDAQ software but wants to start using it right away, can a copy of the software be downloaded from the Campbell Scientific website?
I have lost my installation disks for PC208W. Can you provide a replacement or can I purchase another copy?
Have lost my installation disks for PC208W. Can you provide a replacement or can I purchase another copy?
Does CRBasic have to be used to program a data logger? Does a menu-driven program generator exist for the data logger?
The CR1000/CR3000 wiring panel shows four serial I/O ports on C1 to C8. Do these serial I/O ports provide the same functionality as the SDM-SIO4 module did on a CR10X or CR23X datalogger?
What is the overall length of the CR1000 (including screw tabs) when the CFM100 or NL115 module is added to the wiring panel/interface of the CR1000?

Previous Next