Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
ethernet port CR1000x is not working after overvoltage incident Azamat 2
NetworkTimeProtocol CR1000X - no correct adjustement GNWCLZ 3
bmp5 via serial : dropping data? jankplus 4
Measuring on-time of a heater Dale Reid 2
CR1000 Terminal Emulator MatthewLeak 9
SR50A humidity problems matern 5
CR800/850 program to run on CR300 Paul S 7
CR1000 don't work Jun2024 3
Running two sets of differently-timed measurements jkyoung 5
Logger and ntp server synchronization problem john,park 2
Receiving data from IP camera with CR1000X Johannes 2
NTP server synchronized error john,park 3
Measure infiltration rate Humble_Sampler 1
how to test multiple copies of same type of sensor tjwilli_58 6
reading not recieved Husameldin 3
RV50 Dynamic DNS to NOIP TLT 1
CR1000X Duplicate timestamps marshmel 1
How to compute offset and multiplier for temperature with VX, resistor and BRHALF? weatherguy 0
Communication between Teltonika RUT956 and CR800 Megz 2
Logging data from RM Young 81000 3D Sonic @ 20Hz amato 3
Modbus and CR1000 PPeters 1
Granite 9 - Unable to access SSD kernow 1
Sunshine hours per day osvaldojose 14
CS506 - CRBasic programming question sorri2021 0
10 minutes Max ws running average Arie H. 0
Elapsed time since edge on C1 using TimerInput() Anton 4
AVW200 frequency range TLT 2
data sharing to-ya farm 9
Modbus Slave CR310 GliRam 1
How to wire SDI-12 sensor to the AM16/32B multiples + CR300 JessicaCardoso 8