RETIRED ›
This product is no longer available and has been replaced by: CM204,CM206,CM202. Some accessories, replacement parts, or services may still be available.
UT018 Tower Mounting Bracket with 2 ft Crossarm
Services Available
Repair No
Calibration No
Free Support No

Overview

The UT018 consisted of a bracket, u-bolts, and a 2-ft length of square aluminum tubing. The bracket and u-bolts could attach to a tower leg that had an IPS pipe size of 0.75" to 1.25" (1.05" to 1.66" OD). The square tubing measured 1.5" (3.8 cm) on each side.

Read More

Images

Detailed Description

The UT018 consisted of a bracket, u-bolts, and a 2-ft length of square aluminum tubing. The bracket and u-bolts could attach to a tower leg that had an IPS pipe size of 0.75" to 1.25" (1.05" to 1.66" OD). The square tubing measured 1.5" (3.8 cm) on each side.

One end of the aluminum tubing was through-drilled to accommodate a bolt for attaching one of the following brackets:

  • 6880 Wind sensor, snow depth sensor, or IRGA bracket
  • 14118 CSAT3 and KH20 Bracket
  • UT12VA radiation shield and bracket (retired)
  • UT6P radiation shield and bracket (retired)
  • UTLI Pyranometer leveling base and bracket (retired)

Specifications

  • Weight: 1.6 kg (3.5 lb)
  • Crossarm Length: 60.2 cm (23.7")
  • Bracket Dimensions:
    12.7 x 16.0 x 2.5 cm
    (5.0" x 6.3" x 1.0" )