Archivos para bajar por nombre


Archivos para bajar por categoría

Want instant access to downloads? Log In or Register

A200 Sensor to PC Interface USB Drivers for the Windows operating system.  32 and 64 bit support for... learn more


A205 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows... learn more

A2Control Software 1.4.2 (23.9 MB) 16-08-2022


A2Control software to control and configure the AL205B and AL205R. learn more

AL205B Firmware 1.4.4 (34.6 MB) 30-09-2022


Current firmware for the AL205B. learn more

AL205E Firmware 6.1.1 (571 KB) 08-06-2020


Current firmware for the AL205E. learn more

AL205R Firmware 1.4.4 (34.6 MB) 30-09-2022


Current firmware for the AL205R. learn more


Current ALERT205 operating system and web interface. NOTE: The ALERT205 UI / ALERTLink requires the AL200 to be running ALERT2... learn more


CR6, CR1000X, and CR300 programs demonstrating taking multiple measurements using an AM16/32B relay multiplexer. Examples cover single-ended, differential,... learn more

AP200 CR1000 Program 2.01 (31.3 KB) 12-01-2021


AP200 CR1000(X) Program. Compatible with the LI-850. Note: For those with the LI-840 contact Campbell Scientific for compatible code. learn more

AVW200 OS 06 (551 KB) 10-06-2016


Current AVW200 firmware. Use the Device Configuration Utility version 1.13 or greater to send firmware and to configure... learn more

Backup and Restore Tutorial - (2.31 MB) 29-07-2008


Tutorial that demonstrates the Network Backup and Restore features of LoggerNet. learn more

BALER Patch 4.0 (3.7 MB) 08-02-2010


RETIRED PRODUCT Upgrade Baler version 2.2 or 3.4 to 4.0; no intermediate steps are required. learn more

BaroVue10 OS 1.4 (466 KB) 17-04-2023


Current OS for the BaroVue10. learn more

BaroVue10 Program Example (1 KB) 28-03-2023


Description: Includes an SDI-12 example and a RS-232-serial program example. The programs are written for a CR1000X, but... learn more


This program was written for a CR1000X data logger. Program code of other data loggers will be similar.... learn more

Campbell Viewpoint 2.1.0.2 (86 MB) 09-10-2019


Campbell Viewpoint is viewing software designed to accompany the Campbell Scientific optical sensor range, including the CS135 ceilometer,... learn more

CC5MPX OS 1.25.1 (13.8 MB) 24-06-2019


Current CC5MPX Camera Operating System. Note: Do not extract the firmware update file “CC5MPX_FW_1_25_1.tar.gz”.This compressed file gets sent to... learn more

CC640 OS 1.52 (58.5 KB) 26-11-2009


Current CC640 firmware. Note:Device Configuration Utility 1.15 or newer is required for compatibility. learn more

CCFC Firmware 2.9 (23.0 MB) 29-09-2023


Latest firmware for the CCFC Field Camera. Why Update? This OS resolves an issue where the CCFC camera many... learn more

CCFC Program Examples (15 KB) 21-07-2021


Description: The example programs provide the following functions:  (1) add GPS coordinates using the CCFCGPSLatitude and CCFCGPSLongitude instructions;... learn more

CD295 OS 2.07 (681 KB) 24-08-2010


Current CD295 firmware. The Device Configuration Utility is used to update the CD295 with the new firmware. learn more

CDM-VW300 Example Programs (45.4 KB) 23-05-2013


CRBasic program examples for use with the CDM-VW300 and CDM-VW305. learn more

CELL2XX example programs (6 KB) 22-06-2021


Three example programs as described in the CELL200-Series manual. The Power program shows how to control power to... learn more


To update the CELL200 series operating system: Connect a USB cable between your module and computer. Open a... learn more

CH200 / PS200 OS 11 (434 KB) 24-04-2020


Execution of this download installs the CH200 / PS200 Operating System on your computer.   Note: The Device Configuration Utility... learn more

CH201 Example Programs 2 (3 KB) 11-01-2022


Two CR1000X data logger programs that monitor the CH201. One example program uses RS-232, and the other example... learn more

CH201 OS 3.0 (431 KB) 29-03-2024


Execution of this download installs the CH201 Operating System on your computer.   Note: The Device Configuration Utility is used... learn more


Three programs are included for the ClariVue 20 submersible turbidity sensor. One program uses the M1! SDI-12 command to make... learn more


This example CR1000X program uses the M1! SDI-12 command to retrieve 100 burst measurements from a ClariVue 10... learn more


Two example programs are included that read the ClimaVue 40 data using a CR1000X data logger and the... learn more


An example CR1000X program that uses the R7! SDI-12 command to retrieve data. The program adjusts the barometric... learn more

COM220 OS 05 (671 KB) 23-11-2011


Execution of this download installs the COM220 Operating System on your computer. Note: The Device Configuration Utility is used to... learn more

COM310 Examples (5 KB) 22-04-2008


CR1000 CRBasic program examples showing COM310 data callback and voice support. learn more

COM320 Firmware 4.0 (621 KB) 28-01-2010


Execution of this download installs the COM320 Operating System on your computer.   Note: The Device Configuration Utility is used... learn more

COM320 USB Driver () 01-01-2014

 
Windows USB driver for the COM320 are distributed with the Device Configuration Utililty. In the Device Configuration Utility, click... learn more


CRBasic errors can occur during programming.  This tutorial shows ten common errors and how to fix them.  Included... learn more

Llamar
Micrometeorology Group (435) 227-9100. learn more

CR1000 OS 32.07 (4.60 MB) 15-05-2024


Execution of this download installs the CR1000 Operating System and Compiler on your computer.  It also updates the... learn more


CR1000X program measures the CNR4 and controls the CNF4 heater/ventilator based on environmental conditions, and monitors the CNF4... learn more


CR1000X program that uses differential terminals to measure the four radiation outputs and one excitation terminal and one... learn more


CR1000X programs that use the MSSET and MSGET commands. learn more


CR1000X programs that read continuous data and polled data and use the SET, SETNC, and GET commands. The... learn more


CR1000X program that measures the HFP01SC, performs the self-calibration, and checks for calibration validity. Refer to the manual... learn more


Standard Datalogger Web Browser Interface Use this download to update the data logger's web browser interface. To install this file,... learn more

CR200X Series OS 04 (1.29 MB) 22-09-2015


Execution of this download installs the Operating System and Compiler on your computer for the following dataloggers:CR200X, CR206X,... learn more

CR295 GOES OS 10 (1.97 MB) 08-09-2010


Default operating system for the CR295 that supports transmission of data via GOES satellite.   Also included is the... learn more


CR3000 program measures the Pt-100 sensor for the body temperature of the CNR4. This program requires four differential... learn more

CR3000 OS 32.07 (4.39 MB) 15-05-2024


Execution of this download installs the CR3000 Operating System and Compiler on your computer.  It also updates the... learn more


Manufacturer chipset maintenance update. learn more

CR350 OS 01.06 (5.12 MB) 23-07-2024


This download is for the CR350 datalogger. Execution of this download places the Operating System file(.obj) on your computer.... learn more


This CR6-RF407 Series OS update is for the following: CR6-RF407 CR6-RF412 CR6-RF422 CR6-RF427  Use the Device Configuration Utility to perform this... learn more


Standard Datalogger Web Browser Interface Use this download to update the dataloggers web browser interface. To install this file, send... learn more

CR6 Wifi OS Update 5.02 (2.23 MB) 21-05-2021


CR6 Wi-Fi OS update. This download includes the OS and the update procedure. learn more

CR800 OS 32.07 (4.41 MB) 15-05-2024


Execution of this download installs the CR800 Operating System and Compiler on your computer.  It also updates the... learn more

CR9000X OS 6 (4.04 MB) 23-01-2012


Current Operating System, Compiler and CR9000X support files for the CRBasic Editor. Requires the Device Configuration Utility, LoggerNet... learn more

CRBasicEditor Patch 3.8.1 (43 MB) 13-03-2020


Campbell Scientific has an option to buy the CRBasicEditor as a stand-alone product. This patch will upgrade the stand-alone... learn more

CRBasic Features Tutorial - (3.47 MB) 20-01-2014


Tutorial showing how to use the power of the CRBasic editor to make writing programs easier. learn more

CS110 Example programs 1 (3 kB) 05-05-2020


A CS110 weather station program and a CS110 transfer standard site calibration program. The weather station program measures... learn more

CS120 Firmware 6 (1.51 MB) 10-08-2012


Includes the current CS120 firmware and the CS120 support files for the Device Configuration Utility. learn more

CS125 and CS120A OS 17 (555 KB) 08-06-2023


Campbell Scientific has introduced a new operating system, OS 17, for the CS120A visibility sensor and CS125 present... learn more

CS140-OS Release 10 10 (53 kB) 09-03-2021


Release Note for Operating System OS10 for the Campbell Scientific CS140 Background Luminance Sensor Campbell Scientific has introduced a... learn more

CS140 Program Examples (5 KB) 15-03-2022


Four example CR1000X programs are included that use the POLL, SET, SETNC, and GET commands for the CS140.... learn more


Three example programs that measure the temperature sensors on the CS230/CS231 probe. The number of temperature sensors and... learn more

CS241DM Program Example (2 KB) 18-08-2021


CR6 example program that retrieves information from the input register of four CS241DM sensors, then averages the temperature... learn more

CS241 OS 3.00 (426 KB) 20-08-2024


Includes the current CS241DM firmware. learn more

CS241 Program Examples (2 kB) 15-06-2021


Includes two CR1000X example programs. One program measures the CS241 using the two-wire configuration and the other program... learn more

CS250DM Example Program 1 (1 KB) 07-12-2020


The example CR6 program measures four CS250DM sensors, averages the four temperature measurements, and calculates the standard deviation... learn more

CS255 Program Examples (4 KB) 26-08-2021


Three example programs that measure the temperature sensors on the CS225 probe. The number of temperature sensors and... learn more

CS25 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that control the relay, measure the short circuit current for the reference and... learn more

CS26 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that control the relay, measure the short circuit current for the reference and... learn more

CS27 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that measure the short circuit current for the reference and test modules and... learn more

CS320 Program Example (3 KB) 11-08-2021


Two example programs that use the M4! command to return solar radiation (W/m^2), raw millivolt value (mV), sensor... learn more


Two CR1000X data logger programs that read the CS325DM measurements. An example program is included for each output... learn more

CS475A OS 3.11 (458 KB) 20-06-2022


Current OS for the CS475A. learn more


Four programs are included: two CR1000X programs and two CR1000 programs. The first CR1000X and CR1000 programs measure... learn more

CS650 / CS655 Firmware 2 (429 KB) 02-12-2015


Current CS650 and CS655 firmware.  Note:  The Device Configuration Utility and A200 Sensor-to-PC Interface are required to upload the... learn more

CSAT3 (567 KB) 24-03-1998


PC support software for monitoring and configuring the CSAT3. learn more

CSAT3B Example Programs 1 (4 kB) 20-10-2020


Three example programs.  Simple SDM Program: SDM communications are used to collect data from a single CSAT3B. Simple CPI Program:... learn more


CR1000X datalogger programs for the CSAT3BH with SDM and CPI communications protocols.  Warning: This program is not intended for... learn more

CSAT3BH CR6 Programs 2.03 (9 KB) 20-11-2020


CR6 datalogger programs for the CSAT3BH with SDM and CPI communications protocols.  Warning: This program is not intended for... learn more

CSAT3 Binary to ASCII (33 KB) 15-02-2013


Program that converts a CSAT3 binary data set into ASCII format. Only compatible with data collected using the... learn more


Program that converts a CSAT3 binary data set into ASCII format. Only compatible with data collected using the... learn more


Example CR1000, CR3000, and CR23 datalogger programs to measure the CSAT3 three dimensional ultrasonic anemometer. The programs include... learn more


The CSAT3H Heater Controller ships with this encrypted program. This program is for the unlikely event that the... learn more


Example Visual Basic program for collecting binary CSAT3 data using a PC and RS-232 communications. learn more


Example datalogger programs for finding the optimal SDM baud rate. These programs are used to determine the appropriate... learn more

CS SURVEYOR 1.01 (86 MB) 17-12-2019


CS SURVEYOR is a PC-based scientific data collection, statistical analysis, and visual display/graphing software package with an intuitive... learn more


This program demonstrates creating a custom menu for data logger displays and corresponds to the Campbell Connections video:... learn more

CWB100 Firmware 1.02 (708 KB) 10-08-2012


Latest firmware for the CWB100.   learn more

CWB100 USB Driver () 01-01-2014

 
Windows USB drivers for the CWB100 are installed via the Device Configuration Utililty. In the Device Configuration Utility, click on... learn more

CWS220 Firmware 5 (442 KB) 30-03-2016


Latest firmware for the CWS220.   learn more

CWS655 Firmware 5 (433 KB) 30-03-2016


Latest firmware for the CWS655.   learn more

CWS900 Firmware 5 (448 KB) 30-03-2016


Latest firmware for the CWS900.   learn more


An introduction to data acquisition systems. learn more


This is a data logger wiring diagram spreadsheet template that accompanies the Wiring Diagram Video. The spreadsheet includes... learn more


Tutorial that demonstrates where to find Data Table memory allocation. This indicates how long it will take for... learn more


A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus... learn more

DVW Tool Box 1.3 (13.4 MB) 04-11-2019


DVW Tool Box is an application-specific software tool for demonstration and evaluation of the CDM-VW300, CDM-VW305 and VWire... learn more


CR1000X datalogger program for Campbell open-path eddy-covariance systems. learn more

EasyFlux DL for CR6CP 1.08 (132 KB) 13-06-2024


CR6 datalogger program for Campbell closed-path eddy-covariance systems. learn more

EasyFlux PC 1.0 (55.8 MB) 04-10-2017


EasyFlux® PC is a computer program that processes high frequency time series data, collected using a Campbell Scientific... learn more

EC100 OS 8.02 (560 KB) 14-10-2019


EC100 Operating System. Watch the Video Tutorial: Updating the EC100 Operating System. learn more

ECMon 1.6 (10.7 MB) 29-03-2016


EC100-Series Support Software. learn more

ET107 Default Programs (4 KB) 29-03-2021


One default program is for an ET107 with the 034B wind sensor and another default program is for... learn more

ET107 ETsz Example Programs (290 KB) 23-06-2021


The ETsz() instruction requires the user to input lattitude, longitude, elevation, and crop type for a station's location... learn more

File Control Tutorial - (2.0 MB) 19-01-2009


File Control is used to manage datalogger files.  Starting and stopping a program are shown in this tutorial. ... learn more

German Language Pack 4.6 (769 KB) 13-04-2021


German language files for LoggerNet 4.6. Note: Language support is for the above listed version only. learn more


View Pro is included with LoggerNet 4 and RTDAQ. This tutorial introduces some of the new features including... learn more


A Granite 10 example program using CAN bus to query an ECU for the legislated PID values once... learn more

Granite 10 OS 2.01 (6.66 MB) 04-05-2021


This OS should only be updated via direct connection with the Granite 10.  This download is for the Granite... learn more

GRANITE 6 OS 3.01 (6.69 MB) 26-09-2024


This download is for the GRANITE 6 datalogger. Execution of this download places the Operating System file(.obj) on your... learn more


Standard Datalogger Web Browser Interface Use this download to update the dataloggers web browser interface. To install this file, send... learn more

Granite 6 WiFi OS Update 5.01 (1.33 MB) 07-10-2020


Granite 6 Wi-Fi OS update. This download includes the Wi-Fi OS. learn more

Granite 9 OS 2.01 (6.33 MB) 04-05-2021


This OS should only be updated via direct connection with the Granite 9.  This download is for the Granite... learn more


Current Granite Temp 120 Operating System. Requires the Device Configuration Utility and a USB micro cable.  learn more

HMP155A Example Programs (4 KB) 15-10-2021


Description: Example CR1000X programs that measure either the analog voltage or RS-485 output of the HMP155A. The analog... learn more

HS2 OS 1.08 (518 KB) 28-08-2020


Current HS2 (Hydrosense II) firmware. learn more


Hydro-Link is a browser-based user interface that can be run from a PC or directly from the datalogger. ... learn more


Hydro-Link (German Version) is a browser-based user interface that can be run from a PC or directly from... learn more

Hydro-Link (Zip File) 2.02.16 (66.2 MB) 14-06-2022


Hydro-Link is a browser-based user interface that can be run from a PC or directly from the datalogger.... learn more


Hydro-Link (German Version) is a browser-based user interface that can be run from a PC or directly from... learn more

HydroSci 1.2.1 (41.7 MB) 09-10-2017


HydroSci is used to configure and extract data from the CRS45X Recording Submersible Pressure Transducer and the OBS-3A... learn more

HydroSoft 1.0.8 (5.16 MB) 26-07-2012


Current version of the HydroSense II Support Software. learn more


Spreadsheet for calculating epoxy fill needed for road sensor installation learn more

LevelVue B10 OS 2.1 (467 KB) 03-11-2021


Current LevelVue B10 Operating System. The Device Configuration Utility is used to send this Operating System to the... learn more

LLAC4 Program Example (2 KB) 21-05-2024


Description: Includes two programs, one for a CR1000X and one for a CR350. Both programs measure three different wind... learn more

LNDB Patch 1.3 (41.8 MB) 22-12-2017


Upgrades LNDB 1.x and 1.2 to 1.3. Note: This application requires the Microsoft .Net 4.0 Framework.  If it is not... learn more

LNDB Trial 2.0 (45.7 MB) 01-04-2019


A fully functional 30 day trial version of LNDB (LoggerNet DataBase) software. Note: This application requires the Microsoft .Net... learn more

Llamar
Upgrades for LoggerNet Linux are available by calling Campbell Scientific. learn more

LoggerNet Patch 4.9 (419 MB) 02-10-2024


This patch will upgrade LoggerNet, LoggerNet Remote or LoggerNet Admin version 4.0 and newer to 4.9. A version... learn more

LoggerNet Patch (Large) 3.4.1 (74.2 MB) 22-10-2007


This patch upgrades LoggerNet version 3.0 and newer to 3.4.1. A version of LoggerNet 3.x must be installed... learn more

LoggerNet SDK Patch 4.6 (21.2 MB) 22-04-2020


This patch upgrades LoggerNet SDK 4.0 and greater to version 4.6. learn more


This patch upgrades LoggerNet Server SDK 4.0 and greater to version 4.6.  learn more

LoggerNet Trial 4.9 (423 MB) 02-10-2024


This is a fully functional 30 day trial of the standard version of LoggerNet. This is a trial... learn more

LoggerTalk 2.0 (1.2 MB) 12-05-2006


Voice modem (COM310, COM300 and VS1) voice string editor used with the following dataloggers: CR10(X), CR510 and CR23X. learn more

LR4 OS 1.3 (46 KB) 13-08-2014


Current LR4 firmware. Read the manual for the update procedure. learn more

MD485 OS 05 (583 KB) 06-04-2012


Current MD485 operating system. Requires the Device Configuration Utility. learn more

MeteoPV OS 2.06 (1.36 MB) 26-03-2024


Current MeteoPV Operating System. learn more


Three CR1000X data logger programs that read the MetSens200 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSens300 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSENS500 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSens550 measurements and sensor status. An example program is included... learn more


Three CR1000X data logger programs that read the MetSens600 measurements and sensor status. An example program is included... learn more

NL100 Firmware 10 (770 KB) 23-11-2011


Current NL100 firmware. Requires the Device Configuration Utility and a 9-pin female to female NULL modem cable. learn more

NL200 Drivers () 01-01-2014

 
Windows USB drivers for the NL200 Series are installed via the Device Configuration Utililty. In the Device Configuration Utility, click... learn more

NL240 Drivers () 01-01-2014

 
Windows USB drivers for the NL240 are installed via the Device Configuration Utililty. In the Device Configuration Utility, click on... learn more

NL241 Firmware 10.07 (1.44 MB) 04-03-2022


Current NL241 firmware. Requires the Device Configuration Utility and a USB micro cable.  learn more

OBS-5+ Utility 5.50 (11.3 MB) 23-04-2010


Utility for the OBS-5+ sensor. learn more

PC200W French (668 KB) 15-08-2008


French language files for PC200W 3.3. learn more

PC200W Spanish 4.1 (816 KB) 17-02-2012


Spanish language files for PC200W 4.1. learn more

PC295 2.0.0.1 (1.91 MB) 16-12-2010


CD295 program generator. learn more

PC400 4.8 (186 MB) 14-08-2024


PC400 is Campbell Scientific's free entry-level data logger support software. This versatile software supports a variety of telecommunication... learn more

PC400 French (667 KB) 15-08-2008


French language files for PC400 1.5. learn more

PC400 Spanish (662 KB) 26-03-2008


Spanish language files for PC400 1.5. learn more

PC9000 Patch 5.3.1 (21.9 MB) 02-03-2007


RETIRED PRODUCT Upgrade PC9000 version 5.0, 5.1, 5.2 or 5.3 to 5.3.1; no intermediate steps are required. PC9000 5.0, 5.1,... learn more

PCONNECTCE Patch 2.33 (1.65 MB) 22-05-2008


RETIRED PRODUCT Upgrade PConnectCE 2.0, 2.1 or 2.2 to 2.33. PConnectCE 2.0, 2.1 or 2.2 must be installed on your... learn more

PCONNECT Patch 3.4 (1.5 MB) 22-12-2009


RETIRED PRODUCT Upgrade PConnect 3.0 thru 3.3 to version 3.4. PConnect 3.0 or newer must be installed on your... learn more

PC-OPC Demo 2.1 (1.1 MB) 28-09-2006


Current demo version of our PC-OPC software learn more

PC-TDR 3.0 (7.34 MB) 15-12-2016


Support software designed for the TDR200 and is also compatible with the retired TDR100 Time-Domain Reflectometer. learn more

PS200 Example Programs 1.1 (36.4 KB) 08-12-2014


CR1000 programming examples for use with the PS200.  The examples show how to use both SDI-12 and RS-232... learn more

PWS100 OS 7 (517 KB) 30-11-2015


Current PWS100 operating system.   learn more


Designed to complement the PWS100 the Present Weather Viewer provides a simple yet comprehensive interface showcasing many of... learn more

RainVue OS 2.03 (474 KB) 07-12-2022


Current Operating System for the RainVue 10 and RainVue 20. Requires the Device Configuration Utility and a USB... learn more


An example CR1000X program uses the M! SDI-12 command to measure the RainVue 10 or RainVue 20 and... learn more

RangeVue Program Examples (1 KB) 12-07-2024


Two programs use the C1! SDI-12 instruction to measure the RangeVue-series sensors. One program is for the CR350... learn more


This driver is for the SBT-USC6K USB to Serial cable (CSI Part# 17394 - Silver Cable). Support is... learn more

RF400 Series OS 10 (612 KB) 28-03-2005


Current RF400, RF410, RF415 firmware. Requires the Device Configuration Utility. learn more

RF401 Series OS 04 (646 KB) 14-08-2008


Current RF401, RF411, RF416 firmware. Requires the Device Configuration Utility. learn more

RF430 Series OS 02 (702 KB) 30-08-2011


Current RF430, RF431, RF432 firmware. Requires the Device Configuration Utility. learn more

RF430 USB Drivers 2.08.28 (1.64 MB) 05-03-2013


RF430 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows... learn more

RF45x Operating System 3 (429 KB) 16-06-2023


Current RF451 / RF452 operating system. The Device Configuration Utility is used to update the firmware. learn more

RF500M ALERT OS 02 (770 KB) 04-01-2012


Execution of this download copies the ALERT Operating System (-AL) for the RF500M onto your computer. The ALERT... learn more

RF500M DIAL OS 01 (714 KB) 27-02-2012


Execution of this download copies the Dial Operating System (-DA) forthe RF500M onto your computer. The dial OS... learn more

RF500M OS 04 (492 KB) 04-02-2016


Execution of this download copies the PakBus Operating System (-PB) for the RF500M onto your computer. The -PB... learn more


Example CR1000 datalogger programs to measure a RMY81000 configured as a RMY81005 or RMY81005A. Along with the programs... learn more

RTDAQ French (741 KB) 15-08-2008


French language files for RTDAQ 1.0. learn more

RTDAQ Patch 1.4.1 (208 MB) 13-03-2020


This patch will upgrade RTDAQ version 1.0, 1.1, 1.2, 1.3 or 1.4 to 1.4.1. RTDAQ 1.x must be... learn more

RTDAQ Trial 1.4.1 (217 MB) 13-03-2020


A fully functional 30 day Trial Version of RTDAQ - Real Time datalogger support software for High Speed... learn more

RTMC Pro Patch 4.3.3a (87.7 MB) 22-05-2024


This patch upgrades RTMC Pro 4.0 and newer to 4.3.3a. Note: This application requires the Microsoft .Net 4.0 Framework.... learn more

RTMC Pro Patch 5.0.1 (60.1 MB) 22-05-2024


This patch upgrades RTMC Pro 5.0 to 5.0.1. Note: This application requires the Microsoft .Net 4.0 Framework.  If it... learn more

RTMC Pro Trial 5.0.1 (85.7 MB) 22-05-2024


A fully functional 30 day trial version of RTMC Pro (Real Time Monitoring & Control) software for creating... learn more

RTMC Run-time Patch 4.3.3 (50.6 MB) 13-03-2020


This patch is intended for the stand alone RTMC Run-time product and will NOT upgrade RTMC Run-time included... learn more

RTMC Run-time Patch 5.0.1 (23.0 MB) 22-05-2024


For use with RTMC 5.0 or greater projects only. Projects built with RTMC 4.3.3 or older may not display... learn more

RTMC Web Server Patch 3.2 (26.6 MB) 22-09-2010


RETIRED PRODUCT This patch is for use ONLY if you have LoggerNet 4.0 or RTMC Pro 3.0 or newer. ... learn more

RV50(X) Firmware 4.16.0.021 (46.3 MB) 20-12-2022


Currently this is the recommended RV50(X) firmware for use in Campbell Scientific applications.  It is recommended that RV50(X)... learn more

Sat Commander 11.3.8 (3.78 MB) 08-03-2011


TX312 Support Software. learn more

SAT HDR GOES 3.2.4 (505 KB) 01-02-2005


HDR GOES Support software and Operating System. SAT HDR GOES update for 2004 leap year and reset issues.... learn more

SC105 OS 04 (573 KB) 28-08-2007


Current SC105 firmware. Requires the Device Configuration Utility and a 9-pin socket (female) to socket (female) NULL modem... learn more

SC115 Drivers () 01-01-2014

 
Windows USB drivers for the SC115 are installed via the Device Configuration Utililty.  In the Device Configuration Utility, click... learn more

SC115 OS 05 (429 KB) 17-09-2021


Current version of the SC115 Operating System.  Requires the Device Configuration Utility to upload the operating system to... learn more

SC-USB Drivers 2.10.00 (6.37 MB) 21-05-2014


The SC-USB's Software drivers for use with Windows Operating Systems. learn more

SC-USB Firmware 03 (8 KB) 25-09-2009


Current version of the SC-USB firmware. The SC-USB utility is used to update the firmware in the SC-USB. learn more

SDM-CAN Helper 1.1 (59.5 MB) 29-09-2016


Add-on package for RTDAQ. Assists users of the SDM-CAN device.See the SDM-CAN Helper Overview for more information about this... learn more

SDM-CAN OS 4 (612 KB) 21-11-2006


Current version of the SDM-CAN firmware. learn more


There are three example programs for the CDM-CD16AC. The first program demonstrates using two SDM-CD16AC modules to control... learn more


CRBasic program demonstrating twelve functions of the SDM-IO16A using the SDMIO16() instruction. This program is not an example... learn more

SDMS40 Example Programs 1 (4 KB) 13-08-2020


Three example CR1000X programs. Two programs use SDI-12 and one program uses RS-232. All example programs read the... learn more

SDMS40 Firmware Update 7.4e (864 KB) 26-06-2020


Latest firmware and utilities for the SDMS40. learn more

SDM-SIO1 6 (668 KB) 03-10-2013


Current firmware for the SDM-SIO1. Note: If your version of DevConfig does not support the download of *.hex files, you... learn more

SDM-SIO1A / SDM-SIO4A OS 3.0 (401 KB) 10-01-2024


Current firmware for the SDM-SIO1A and SDM-SIO4A. learn more


In this example program, a SDM-SIO2R will read a visibility measurement from the CS120A. If the SIO2R does... learn more

Short Cut 4.6 (32.6 MB) 02-10-2024


Short Cut creates simple programs for our CR200-series, CR300-series, CR510, CR500, CR10(X), 21X, CR23X, CR6, CR800, CR1000(X), CR1000Xe,... learn more

SkyVue-8-CS136-OS 2 (460kb) 11-12-2019


Introduction Campbell Scientific has introduced a new operating system, OS2 for the SkyVue 8 ceilometer. It is fully backwards... learn more

SkyVue Example Programs 1 (3 KB) 07-11-2019


CRBasic data logger programs for use with CS message 1. One example includes a cyclic redundancy check (CRC).Please... learn more

SkyVue PRO-CS135-OS 14 (429kb) 11-12-2019


Campbell Scientific has introduced a new operating system, OS14 for the SkyVue PRO and CS135 ceilometer. It is... learn more

SMP10 Example Programs 1 (3 KB) 12-01-2021


Includes two CR1000X programs. One program measures the SMP10 sensor using Modbus over RS-485 and the other program... learn more

SMS 4.10 (6.73 MB) 06-08-2007


SMS (Storage Module Software) is a utility used to configure and retrieve data from Campbell Scientific storage modules. ... learn more

SN500SS Program Example (1 KB) 11-08-2021


An example program that uses the M! SDI-12 command to measure the incoming short-wave (SW) radiation, outgoing SW... learn more

SnowVue 10 OS 1.19 (472 KB) 08-02-2024


Current SnowVue 10 operating system.  Note: OS update must be performed using the aXLOADOS! SDI-12 command. Please refer to the... learn more


This patch adds SnowVue 10 support to ShortCut version 4.4. learn more


Two programs that read the SnowVue 10 sensor. One program performs temperature compensation to provide snow depth. The... learn more


Tutorial to help you decide which of our software packages will best meet your needs. learn more


This example CR6 program collects the volumetric water content, relative permittivity, soil temperature, and bulk electrical conductivity for... learn more


These example programs demonstrate how to use the CDM_VoltFilt(), CDM_BridgeFilt(), and CDM_FFTFilt() instructions on a Spectrum module. Additionally,... learn more

SR05 Example Programs 1 (2 KB) 10-09-2021


Two CR1000X data logger programs that read the SR05 sensor. An example program is included for each output... learn more

SR30 Example Program 1 (2 KB) 10-12-2020


The example CR1000X program measures the SR30 sensor. The program will store the values if the result code... learn more

SR50A/AT OS 1.3 (52 KB) 22-08-2007


Current SR50A / AT firmware. learn more

SR50A example programs 1 (11 kB) 22-01-2020


CR6 and CR1000X programs that directly read each type of SR50A output (SDI-12, RS-232, RS-485), and a CR1000... learn more


CR6 and CR1000X programs that read the SR50AH SDI-12 output and control the SR50AH heater. A 107 sensor... learn more

SR50AT example programs 1 (11 kB) 22-01-2020


CR6 and CR1000X programs that directly read each type of SR50AT output (SDI-12, RS-232, RS-485), and a CR1000... learn more


CR6 and CR1000X programs that read the SR50ATH SDI-12 output and control the SR50ATH heater. The programs use... learn more


SurfaceVue 10 standard programs with and without NTCIP. Set a constant to select RS-232 or RS-485 communications. Another... learn more

Tasks Tutorial - (2.45 MB) 29-07-2008


Tutorial that demonstrates the use of the Task Master in Loggernet for automating tasks. learn more

TDR100 OS 0.9724 (60 KB) 15-08-2012


Current TDR100 Operating System. PC-TDR must be connected to TDR100. learn more

TDR200 OS 3 (472 KB) 22-01-2019


Current version of the TDR200 firmware. Requires the use of the PC-TDR to update the TDR200 OS. Instructions can... learn more


Three example programs are available for the TempVue 20. The SDI-12 program uses the R0! SDI-12 instruction to... learn more


This program uses the R0! SDI-12 instruction to retrieve the temperature measurement. The program is written for a CR1000X,... learn more

TGA100A 1.20 (2.33 MB) 19-10-2007


TGA100A user interface software. learn more

TGA100A/200 OS 2.2 (1.2 MB) 12-06-2009


Current TGA100A / 200 Operating System and TGA.CR9 program.  Requires the Device Configuration Utility to upload to the... learn more

TGA100A OS 1.60 (1.13 MB) 19-10-2007


Current TGA100A Operating System and TGA.CR9 program. Requires the Device Configuation Utilty to upload to the TGA100A system. learn more

TGA Windows 2.2 (5.81 MB) 02-02-2018


TGA Windows software for use with the TGA100A / 200 system. learn more

TGA Windows Patch 2.2 (3.58 MB) 12-06-2009


This will patch upgrade TGA Windows 2.0 and 2.1 to 2.2. learn more

TS100SS Program Examples (2 KB) 09-09-2024


Two example programs that read a HygroVue5/HygroVue10 temperature and relative humidity sensor and measure the fan speed of... learn more

TX321 / TX320 GPS Update 4 (1.09 MB) 18-12-2019


This download is a zip file that contains new firmware v11.11 and v10.23 for the G6 radio internal... learn more


CR3000, CR1000, or CR800-series data logger program for the TX325 that sets up self-timed and random transmissions and... learn more


GRANITE-series, CR6, CR1000X, or CR300-series data logger program for the TX326 and TX325 that sets up self-timed and... learn more


This driver is for the CB-FTDI USB to Serial cable (CSI Part# 17394 - Black Cable). Support is... learn more

VDIV Program Example (1 KB) 29-07-2022


In this example program, a VDIV10:1 and the VoltDiff() instruction are used to measure an input voltage with a... learn more

VisualWeather Patch 3.1.3 (45.7 MB) 03-08-2012


Upgrade Visual Weather version 3.x to 3.1.3. This patch requires that version 3.x exists on the computer. learn more

VisualWeather Patch 2.3 (26.3 MB) 19-12-2008


Upgrade Visual Weather version 2.0, 2.1 or 2.2 to 2.3. This patch requires that version 2.0, 2.1 or 2.2... learn more

VisualWeather Trial 3.1.3 (56.1 MB) 03-08-2012


A fully functional 30 day trial version of VisualWeather.  VisualWeather is for those who want reliable, real-time weather data... learn more

Volt100 OS 06.03 (640 KB) 09-05-2023


Execution of this download installs the Volt108 / Volt116 Operating System on your computer which can then be uploaded to... learn more

VWire 305 OS 6 (602 KB) 21-04-2020


Execution of this download installs the VWire 305 Operating System on your computer for upload to the VWire... learn more


Program to read 20 Hz dynamic data from two VWire 305 analyzers measuring eight channels each. learn more


LoggerNet 4.0 was released in August of 2009. This tutorial demonstrates some of the new features and enhancements.... learn more


Two example CR1000X programs that read the WindSonic1. One program reads the sensor directly, and the other program... learn more


An example CR800-series program and a CR200(X)-series program that read the WindSonic4. Both programs filter out data when... learn more


An example program to read and store Wintersense SDI-12 data every five minutes. Program uses 0 for the... learn more

Wireless Sensor Planner 1.7 (30.5 MB) 08-08-2013


The Wireless Sensor Planner is a tool for use with Campbell Scientific wireless sensors.  It assists in designing... learn more

CR10X OS 1.23 (1.45 MB) 02-04-2010


Execution of this download installs the CR10X Operating System (Mixed-Array) on your computer.   Note: The Device Configuration Utility is... learn more

CR10X-PB OS 1.10 (647 KB) 28-03-2006


Execution of this download installs the CR10X PakBus Operating System on your computer.   Note: The Device Configuration Utility is... learn more

CR10X-TD OS 1.15 (645 KB) 28-03-2006


Execution of this download installs the CR10X Table Data Operating System on your computer.   Note: The Device Configuration Utility is... learn more

CR200 Default OS 10 (1.97 MB) 08-09-2010


Default operating system loaded into the datalogger at the factory.  Also included is the Compiler and CRBasic Editor... learn more

CR200 MODBUS OS 10 (1.97 MB) 08-09-2010


Special operating system that supports ModBus communication and SDI-12 sensors .  Also included is the Compiler and CRBasic... learn more

CR200 Serial Input OS 10 (1.97 MB) 08-09-2010


Special operating system that supports serial sensors, SDI-12 sensors, and sending data to another PakBus device.  Also included... learn more

CR23X OS 1.19 (690 KB) 28-03-2006


Execution of this download installs the CR23X Operating System (Mixed-Array) on your computer. Note: The Device Configuration Utility is... learn more

CR23X-PB OS 1.10 (706 KB) 28-03-2006


Execution of this download installs the CR23X PakBus Operating System on your computer. Note: The Device Configuration Utility is... learn more

CR23X-TD OS 1.15 (703 KB) 28-03-2006


Execution of this download installs the CR23X Table Data Operating System on your computer. Note: The Device Configuration Utility is... learn more

CR5000 OS 7 (3.0 MB) 26-02-2014


Current Operating System, Compiler and CR5000 support files for the CRBasic Editor. Requires the Device Configuration Utility, LoggerNet... learn more

CR510 OS 1.15 (640 KB) 28-03-2006


Execution of this download installs the CR510 Operating System (Mixed-Array) on your computer. Note: The Device Configuration Utility is... learn more

CR510-PB OS 1.10 (647 KB) 28-03-2006


Execution of this download installs the CR510 PakBus Operating System on your computer. Note: The Device Configuration Utility is... learn more

CR510-TD OS 1.16 (645 KB) 28-03-2006


Execution of this download installs the CR510 Table Data Operating System on your computer. Note: The Device Configuration Utility... learn more

PC208W Patch 3.3 (4.5 MB) 11-04-2001


Upgrade PC208W versions 3.0-3.2a to the latest 3.x revision; no intermediate steps are required. PC208W 3.0 or greater... learn more