Services Available | |
---|---|
Repair | Yes |
Calibration | Yes |
Free Support | Yes |
Our ET107 ETo station consists of meteorological sensors, an aluminum 3 m pole, and an environmental enclosure that houses a CR1000M module and a 7 Ahr sealed rechargeable battery. The battery is recharged via an ac transformer or a 10 W solar panel. Sealed circular connectors are provided on the outside of the enclosure to simplify sensor hookup.
Read MoreOur ET107 ETo station consists of meteorological sensors, an aluminum 3-m pole, and an environmental enclosure that houses a CR1000M module and a 7-Ahr sealed rechargeable battery. The battery is recharged via ac power or a 10-W solar panel. Sealed circular connectors are provided on the outside of the enclosure to simplify sensor hookup.
Meteorological sensors included with the ET107 are the CS305-ET Solar Radiation Sensor, HMP60-ETS Air Temperature and Relative Humidity Probe, TE525-ET Tipping Bucket Rain Gage, and either the 034B-ETM Wind Set or WindSonic1-ETM 2-D Sonic Wind Sensor.
The ET107 can also measure the:
-NOTE- |
The ET107 has components that have their own specifications. To review these specifications, refer to the appropriate products below: |
Replacement sensors for the ET107 have a -ET or -ETM suffix. These sensors are listed under Ordering.
The ET107 can also measure the:
One default program is for an ET107 with the 034B wind sensor and another default program is for an ET107 with a WindSonic1.
The ETsz() instruction requires the user to input lattitude, longitude, elevation, and crop type for a station's location in order to generate accurate calculations of ET. The Generic_ET_107_ETsz.CR1 and Generic_ET_107_ETsz_Windsonic.CR1 programs use the ConstTable() intruction to create a constants table that allows the user to easily input these values using Loggernet, PC400, or a keyboard display. These values only need to be set once, during station set up.