Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Get a data from CR-1000 with normal PC serial program??


superego Aug 24, 2017 03:16 AM

Hi there...

As a title... can I get a DataLogger's Real-Time-Data & Saved-Data by using nornal serial emulator.. ?  Kind of 'Teraterm' or other is fine.

Target Device is CR-1000, CR-10X and CR-3000.

Connection method is normal RS-232 Null Modem Cable.

I hope to see data as ASCII form, not a HEX form.

I think there is specific command.

Any suggestion and infrom is fine.

Thanks.

BR.


Dana Sep 1, 2017 10:19 PM

Hello Superego,

The CR1000 manual has a section on the terminal commands available in the datalogger.

https://www.campbellsci.com/cr1000

Dana W. 

Log in or register to post/reply in the forum.