CM221 Right-Angle Mounting Kit
Attach a Sensor with a Vertical Pipe to a Crossarm
weather aplicaciones soportadas water aplicaciones soportadas energy aplicaciones soportadas gas flux and turbulence aplicaciones soportadas infrastructure aplicaciones soportadas soil aplicaciones soportadas

Overview

The CM221 mounts a pipe or tube at 90° to another pipe or tube. It is typically used to attach a sensor with a vertical pipe (including most wind sensors) to a crossarm. The cast aluminum, right-angle mounting bracket has 3.8 cm (1.5 in.) U-bolts and hardware and will accommodate tubing with a 1- to 1.5-in. outer diameter. (For more information, refer to the Compatibility section below.) 

If your application requires the ability to adjust or level your sensor, consider using the CM230 Adjustable Inclination Mounting Kit instead. 

Images


Specifications

U-bolt and Washer Material 304 stainless steel
Bracket Material Cast aluminum
Dimensions 7.6 x 7.6 x 9.1 cm (3.0 x 3.0 x 3.6 in.)
Weight 340.19 g (0.75 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Sensors

Product Compatible Note
014A-L
03002-L
034B-L
05103-45-L (retired)
05103-L
05106-L (retired)
05305-L
27106T-L
52202-L
CSAT3 (retired)
SI-111 (retired)
SR50A-L (retired)
WINDSONIC-L (retired)
WXT520 (retired)

Mounting Equipment

Product Compatible Note
CM202
CM204
CM206

Additional Compatibility Information

Sensors

The CM221 is compatible with sensors that have a 0.75 to 1 in. IPS (1 to 1.5 in. OD) pipe mount.

Pipe

The CM221 is compatible with user-supplied pipe that has a 0.75 to 1 in. IPS (1 to 1.5 in. OD).

Peripherals

The CM221 can be used to mount the 17992 GPS antenna and the 27084 CVF3 Mounting Stand.


Listed Under

Replacement Part for the following products: