| Services Available | |
|---|---|
| Repair | Yes |
| Calibration | Yes |
| Free Support | No |
Overview
The CR9000XC, a compact version of the CR9000X, holds up to five user-selectable I/O modules. It is a modular, multiprocessor system that provides precision measurement capabilities in a rugged, battery-operated package. It consists of an environmental enclosure, a base system, and a chassis containing slots for the I/O modules.
The CR9000X series is our fastest datalogger series, with a measurement rate of 100,000 Hz and a clock speed of 180 MHz, making it ideal for rapid sampling applications.
See the entire list of available I/O modules for the CR9000XC and CR9000X.
Read MoreBenefits and Features
- Up to five I/O modules can be used to configure a system for your specific application.
- Ideal for vehicle testing, structural or seismic monitoring, or other applications that require rapid sampling or a large number of high resolution channels
- Throughput of 100,000 measurements per second is ideal for high demand research, such as flux and complex structural monitoring.
- Contains an on-board 10baseT/100baseT port allowing direct Ethernet connection; an interface such as the NL100 is not required
- CR9052IEPE and CR9052DC modules provide powerful anti-aliasing and real-time FFT capabilities that are unique to the CR9000X-series dataloggers
- Integrated PCMCIA slot accepts memory cards up to 2 GB for stand-alone data collecting.
- Entradas protegidas por tubos de descarga de gas (GDT)
- Collects and stores data and controls peripherals as the brain of your system
Images
Detailed Description
The CR9000XC's base system includes a CR9032 CPU module, CR9041 A/D module, CR9011 power supply module, and 128-Mbytes SDRAM memory for program and data storage. The CR9000XC's internal battery has a 7-Ahr capacity.
A mix of I/O modules is selected based on the measurements required for the application. Campbell Scientific offers a large variety of modules. Individual I/O modules can be swapped out, allowing the system to be reconfigured if requirements change.
I/O modules whose model numbers end in an E (e.g., CR9051E, CR9055E) and the CR9052DC include an easy connector module. Easy connector modules allow sensor wiring to remain connected while the input module’s measurement electronics and the rest of the datalogger system are used elsewhere.
The CR9000XC includes a non-corrosive, sealed, aluminum enclosure that provides protection from water, dust, and most environmental pollutants.
CR9000CX versus CR9000CIn August 2004, the CR9000XC replaced the CR9000C. The CR9000C and CR9000XC dataloggers differ in their CPU Module; the CR9000C datalogger uses the CR9031 and the CR9000XC datalogger uses the CR9032. The CR9032 CPU module supports a measurement rate of up to 100,000 Hz, provides a 180 MHz clock speed, and adds a built-in RS-232 port, 10baseT/100baseT port, CS I/O port, and PC-card slot. The built-in ports enable communication without using the special interfaces (e.g., PLA100, TL925, NL105) that were required for the retired CR9000C datalogger. The PC-card slot allows the CR9000XC to store data on a Type I, Type II, or Type III PCMCIA card, or on a CompactFlash® card if an adapter is used. An existing CR9000C datalogger may be upgraded to a CR9000XC by replacing the CR9031 CPU module with the CR9032 CPU module. |
Specifications
| -NOTE- |
|
| Operating Temperature Range |
|
| Analog Inputs | 28 single-ended or 14 differential per CR9050, CR9051E, or CR9055(E) module |
| Pulse Counters | 12 per CR9071 module |
| Communications Ports |
|
| Switched 12 Volt | 1 |
| Digital I/O |
|
| Analog Voltage Accuracy | ±(0.07% of reading + 4 A/D counts), -25° to +50°C |
| ADC | 16-bit |
| Power Requirements | 9.6 to 16 Vdc |
| Communication Protocols | SDM |
| Warranty | 3 years |
| Dimensions | 25.4 x 27.9 x 22.9 cm (10 x 11 x 9 in.) |
| Weight | 12.3 kg (27 lb) with modules |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Software
| Product | Compatible | Note |
|---|---|---|
| LoggerNet | Version 2.0 or higher | |
| PC200W (retired) | ||
| PC400 | Version 1.0 or higher | |
| RTDAQ | Version 1.0 or higher | |
| Short Cut | ||
| VISUALWEATHER | Version 2.0 or higher |
Additional Compatibility Information
Compatibility with Retired Products
Customers can add CR9000XC dataloggers to networks containing the older CR9000 or CR9000C dataloggers. I/O modules other than the CR9080 can be used with either the CR9000 series or CR9000X series. CR9000 series communication interfaces (i.e., NL105, BLC100, TL925, PLA100) are not compatible with the CR9000XC, and therefore have been retired. RTDAQ software is not compatible with the older CR9000(C). Customers can upgrade a CR9000C datalogger to a CR9000XC datalogger by replacing the CR9000C's CR9031 CPU module with the contemporary CR9032C CPU module.
Sensors
With several channel types, the CR9000XC is compatible with many sensors, including thermocouples and 4 to 20 mA sensors.
Measurement and Control Peripherals
Measurement and control peripherals typically used with the CR9000XC are our AM25T 25-Channel Solid State Multiplexer, SDM-CAN Interface, SDM-INT8 Eight Channel Interval Timer, and SDM-SIO4 Serial Input/Output Module. Other measurement and control peripherals are compatible but they do not support the CR9000XC datalogger's maximum measurement rate and are therefore impractical for most CR9000XC applications.
Communications
The CR9000XC typically communicates with a PC via direct connect or Ethernet. Because the CR9000XC has an on-board 10baseT/100baseT port, an Ethernet interface such as the NL100 is not required.
Storage capacity can be increased by using a PC or CompactFlash card. The CR9000XC's PCMCIA card slot supports one Type I, Type II, or Type III PC Card or the CF1 adapter and one CompactFlash (CF) card.
The storage capacity of Type II cards exceeds 1 GB. Type III cards provide data storage capacities exceeding 1 GB but may not be suitable for all environments. Campbell Scientific offers CF cards that store up to 2 GB of data. Please note that the PCMCIA and CompactFlash cards need to be industrial-grade and have a storage capacity of 2 GB or less.
Other communication peripherals are compatible but they do not support the CR9000XC datalogger's maximum measurement rate and are therefore impractical for most CR9000XC applications.
Enclosures
The CR9000XC includes a non-corrosive, sealed, aluminum enclosure that provides protection from water, dust, and most environmental pollutants.
Software
CRBasic, the CR9000XC's full programming language, supports simple or complex programming and many on-board data reduction processes. CRBasic is included in RTDAQ, LoggerNet, and PC400.
RTDAQ Real-Time Data Acquisition Software must be ordered separately; the CR9000XC is also compatible with other Campbell Scientific software.
Documents
Product Brochures
Technical Papers
Frequently Asked Questions
Number of FAQs related to CR9000XC: 3
Expand AllCollapse All
-
The CR9000X and CR9000XC differ only in the number of I/O cards they can hold. The CR9000X can hold 9 I/O cards, and the CR9000XC can hold 5 I/O cards. We provide both sizes to accommodate our customers; the same I/O cards can be used in either chassis.
-
The CRBasic Editor Help contains example program code for all instructions in the data logger. Look for the Example link at the top of each instruction topic. The CRBasic Help Tutorial demonstrates how to access this and other online CRBasic Editor Help files.
Also, many programming examples can be found in the data logger and sensor manuals that are available on the Campbell Scientific website.
-
A free program generator for all Campbell Scientific data loggers is Short Cut for Windows (SCWin). Short Cut can be used to create programs in many situations where Campbell Scientific equipment is used. The Campbell Scientific YouTube channel has a two-part series on using Short Cut.
In situations where program requirements are too complex or specialized for Short Cut, programs can be written in any text editor that can edit and save plain ASCII text. However, creating an error-free program would be very difficult. The CRBasic Editor that comes with PC400 and LoggerNet provides a programming environment with procedure templates, integrated help, programming examples, the ability to test compile the program before sending it, and many other features that can be very helpful when developing a program.