This product is no longer available and has been replaced by: RF500M. Some accessories, replacement parts, or services may still be available.
Imagen no disponible
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
Used with our RF300-series radios, the RF95A provides an RF communication interface between the datalogger and an RF300-series radio.
Read MoreSimilar Products
Detailed Description
Note: The RF95A has been replaced by the RF500M modem. The RF95A remains available for customers with application-specific custom PROMS.
The RF95A is used with our RF300-series radios. It provides an RF communication interface between the data logger and a RF300-series radio. Each RF95A contains dip switches that allow the user to address the modem with a number between 0 and 255.
The RF95A and the primary transceivers it supported, the RF300-series radios, were replaced on our standard price lists by the RF310-series radios and RF310M modem in June 2002.
Specifications
- Weight: 227 g (8 oz)
Operating Temperature
- Standard: -25° to +50°C
- Extended: -55° to +85°C
Dimensions
- No Mounts:
16.3 x 8.4 x 2.5 cm
(6.4" x 3.3" x 1.0") - With Connectors and Mounts:
17.3 x 11.9 x 2.5 cm
(6.8" x 4.7" x 1.0")
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR10 (retired) | ||
| CR10X (retired) | ||
| CR23X (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR9000 (retired) |
Communication Devices
| Product | Compatible | Note |
|---|---|---|
| HT90 UHF (retired) | ||
| HT90 VHF (retired) | ||
| P50 UHF (retired) | ||
| P50 VHF (retired) | ||
| RF100 (retired) | ||
| RF200 (retired) | ||
| RF232A (retired) | ||
| RF300 (retired) | ||
| RF301 (retired) | ||
| RF302 (retired) | ||
| RF303 (retired) | ||
| RF304 (retired) | ||
| RF500B (retired) | ||
| RF500M |
Additional Compatibility Information
Radios, Radio Modems, and Radio Base Stations
The RF95A had earlier replaced the RF95 in all applications [the RF95A retained the RF95's item number]. The RF95A is backward compatible with existing Campbell Scientific RF systems but not compatible with RF310-series radios.
If RF95A modems are used in a network containing RF500M modems or RF500B base stations then the RF95A modems must use the -TD PROM; the data loggers must also be Table Data (-TD) or PakBus (-PB) versions.
Power Source
The RF95A requires a 5 V power supply from the data logger's CS I/O port or from a PS100/A100 (non-data-logger repeater site).