Overview
The DCDC18R Boost Regulator accepts an 11 to 16 Vdc input and boosts it to 18 Vdc, allowing a vehicle to recharge CR3000, CR5000, or CR23X sealed rechargeable batteries. The DCDC18R conveniently attaches to the side of the sealed rechargeable base next to the charger input.
Read MoreImages
Detailed Description
Supply voltage from the vehicle is connected to the DCDC18R's Vin terminals. Regulated voltage to charge the datalogger’s sealed rechargeable power supply are sourced from the Vout terminals.
Specifications
| Maximum Input Current | 2.25 A |
| Input Voltage | 11 to 16 Vdc |
| Output Voltage | 18 Vdc ±5% |
| Quiescent Current | 4 mA |
| Output Current | up to 1.0 A |
| Power Conversion Efficiency | 80 to 90% |
| Operating Temperature Range | -40° to +60°C |
| Dimensions | 6.4 x 8.6 x 2.8 cm (2.5 x 3.4 x 1.1 in.) |
| Weight | 91 g (3 oz) |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR200 (retired) | ||
| CR205 (retired) | ||
| CR205 (retired) | ||
| CR206 (retired) | ||
| CR210 (retired) | ||
| CR211 (retired) | ||
| CR215 (retired) | ||
| CR216 (retired) | ||
| CR23X (retired) | ||
| CR295 (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |
Mounting Equipment
| Product | Compatible | Note |
|---|---|---|
| ENC10/12 | ||
| ENC10/12R | ||
| ENC12/14 | ||
| ENC14/16 | ||
| ENC16/18 | ||
| ENC24/30 | ||
| ENC24/30S |
Additional Compatibility Information
Enclosure Considerations
A desiccated, non-condensing environment is required. The DCDC18R includes built-in keyhole flanges for mounting to the backplate of a Campbell Scientific enclosure.