This product is no longer available and has been replaced by: CS451. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The CS425 was manufactured by Druck for use in surface, groundwater, or hostile fluid applications.It was similar to the CS420 (also retired), but was not as accurate. The sensor's accuracy was ±0.25% FS, BSL (combined non-linearity, hysteresis, and repeatability). The CS425 featured a titanium body with an isolated diaphragm and NEMA6 (IP68) ingress protection to 2300 feet of water.
Read MoreImages
Detailed Description
The CS425 was removed from our pricing system on December 5, 2008.
Specifications
- Weight: 3 lbs
- Length: 4.0" (10.2 cm)
- Diameter: 0.8" (2.0 cm)
- Output voltage: 25 mV for 1 psig range, 50 mV for 2.5 and 5 psig ranges, 100 mV for ranges 10 psig and above
- Operating Temperature Range: -2° to +30°C (compensated)
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |
Additional Compatibility Information
Data Logger Considerations
An excitation voltage from the data logger and either one (four-wire gages) or two (six-wire gages) differential channels are required. Four wires can be used where cable lengths are short; six wires compensate for excitation voltage loss on long cables, thereby improving accuracy.
PST System
The CS425 is NOT compatible with the PST system. [Underwater connectors for vented transducers are available. Contact Druck for pricing and details.]