Read data and enter instructions without opening enclosure
Overview
The CD100 is a mountable display with a keypad for datalogger data entry and display. It has a vacuum flourescent display for responsive use through a very wide operating temperature range. Its operation is the same as the CR1000KD.
Read MoreBenefits and Features
- Without opening the enclosure, check the data logger's status, display or plot sensor readings, and stored values, as well as enter numeric data
- Supports custom menus and displays to simplify routine operations
- Provides water and dust ingress protection rating IP66 when installed in enclosure lid
Images
Detailed Description
The CD100 allows you to check the datalogger's status, to view or plot sensor readings and stored values, and to enter numeric data or toggle ports. Security can be set in the datalogger to prevent unauthorized personnel from accessing the data.
The CD100 has a 16-character keypad and a display that can show 8 lines by 21 characters (64 by 128 pixels). The keypad's design permits operation with a gloved hand.
The CD100 is both water and dust protected, providing an IP66 rating when installed in the enclosure lid.
Custom Menus and Displays
Menus for the CD100 can be customized to simplify routine operations. Viewing data, toggling control functions, or entering notes are common applications. Individual menu screens support up to eight lines of text with up to seven variables.
Specifications
| Display/Keyboard Description |
|
| Keypad | 16 key, alphanumeric |
| Interface | CS I/O, SDC address 2 |
| Power Requirements | Powered from the data logger's CS I/O port. |
| Water & Dust Ingress Protection Rating | IP66 (when installed in enclosure lid) |
| Temperature Range |
|
| Dimensions | 17.5 x 13.7 x 3.6 cm (6.9 x 5.4 x 1.4 in.) |
| Weight | < 0.5 kg (< 1 lb) |
Current Drain |
|
| Quiescent | Negligible (0.02 mA) |
| Active | 140 mA |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR1000X | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR300 | The CR300-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger. | |
| CR3000 (retired) | ||
| CR310 | The CR300-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger. | |
| CR350 | The CR350-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger. | |
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |