| Services Available | |
|---|---|
| Repair | No | 
| Calibration | Yes | 
| Free Support | No | 
The CS105 measured barometric pressure for the range of 600 to 1060 mb (approximately sea level to 12,000 feet). A 12 V switching circuit was included in the sensor; a datalogger control port was used to control 12 Vdc power to the sensor, reducing power consumption. A sensor warm-up time of up to 1 second was recommended.
				Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
| Product | Compatible | Note | 
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) | 
A 2.5-ft cable is supplied with the sensor for connection to the data logger. The cable connects to a control port, single-ended analog input terminal, 12 V power terminal, and ground terminal on the data logger.
The CS105 is typically mounted next to the data logger inside an ENC12/14 or larger enclosure. The very small ENC100 is available for housing the CS105 separately, in its own enclosure.